MBR MR-I

MBR modules information:1. Technical Data of the PP Hollow Fiber Raw Material PP External Shape Hollow fiber Diameter Inside 320um-350um Diameter Outside 400um-450um Pore Size 0.1um-0.2um Pore Density 40%-50% X-axis Strength 120MpaVentilation Rate >7.0x102cm3/cm2.s.cmHg Available Temp. 4-45 PH 0-14 2. Technical Data of Submerged Hollow Fiber Cartridge Type LayersSize (mm)axcxbMembraneArea(m2)PressureMinus (Mpa)Ref.designed Flux (T/d)MR-I1523x810x40040.01- 0.030.5-0.8Connector pipe: ABS, piper diameter: DN15 pipe connector, or DN20pipe connector Ref. Permeation rate (-0.015mpa) is for the application on the waste-water treatment 3. Application area: Residential waste-water, industrial wastewater, chemical and madicine waste-water.4. Advantages of MBR modules: PP hollow fiber MBR modules with strong fiber, long working life, low energy consumption, simple membrane cleaning, low operation cost, consistent effluent quality with varying influent condition, less sludge production and reduced disposal costs.5. Ref. processing of MBR: Waste-water → Metalslit →Collection tank (sediment tank) → Short oxygen tank (Pre-aeration tank) → MBR system → Clean-water Inlet waste-water quality: COD can be 200-4000mg/L, BOD can be 100-2500mg/L. Outlet water quality: COD can be <30mg/L, BOD can be <10mg/L. SS <0.5mg.L. The outlet water from MBR can be recycling in some place.