marine Elektrokettenankerwinde

This marine electricchain anchorwindlass by the motor driver, bring about a high transmission efficiency of the gear box, delivered to the spindle, through the electrical control box to control motor and the positive growth rate slow down the completion of the operation of anchoring and windlass. The other side of it there is a Volume used for cable reel, mooring work to be completed through a clutch and a combination of the spindle, the rotating drum driven to complete the retractable cable action. It can be broken down anchor can also be a separate retractable cable. It is also equipped with a side drum mooring for mooring the ship docked to increase greater convenience. At the same time, and it also has a control configuration of its electrical control box. Its base is from high-strength steel plates welded together, rotating bearing components produced using high quality copper. And hull bolt connections for the installation. Installation convenience. It is the structure of solid and stable, excellent manufacturing quality and low prices. Easy to operate, suitable for a variety of small and medium-sized ship docked mooring a. Achoring Part Dia of Chain 40mm(AM2) Working load: 68kN Rated speed: 9m/min Overload pull: 102kN Holding load: 204kN Quan of wheel: 1 b. Drums Part Working load: 50kN Rated speed: 12m/min Dia of rope: 38mm Capacity for the rope: 190m(6 Layers) Quan of drum: 1 c. Warping part Warping pull: 30kN d. Motor part Type of el-motor JZ2-H-42-4/8/16 (IP56) Power 11/11/7.5kW Rotating speed 1400r/665/300min Working duty S2