LXP100 Serie Leistungswiderstände

LXP100 series power resistors EBG offers the totally encapsulated and insulated TO-247 package for low ohmic value and non-inductive design for high frequency and pulsing applications.Ideal use is for power supplies. This series is rated at 100 Watts mounted to a heat sink. The special features include:100 Watt power rating at 25°C case temperature TO-247 package configuration,Single screw mounting simplifies,attachment to the heat sink. A totally molded housing for enviromental protection.Non-Inductive design,Resistor package totally insulated from heat sink. Resistance Range: 0.05Ω to 1MΩ other values on request Resistance Tolerance:±1%, ±2%, ±5%, ±10% Temperature Coefficient:>10Ω: ±50ppm/°C, referenced to 25°C, ∠R taken at +105°C; others on request! Max. Operating Voltage: 350 V Dielectric Strength: 1,800V AC Insulation resistance: 10GΩ min. Power Rating:100 W at 25°C case temperature.derated to 0 W at 175°C. Momentary Overload:1.5 times rated power and V(DC) <1.5Vmax for 5 seconds. ∠R < ± (0.50% + 0.0005Ω) Dielectric strength:GJB-360A-96 method 301,(1,800V AC, 60s),∠R < ± (0.15% + 0.0005Ω) Life:MIL-R-39009D 4.8.13 , 2,000hours at rated power,∠R < ±(1.0% + 0.0005Ω). Moisture Resistance:-10°C - +65°C, RH>90%, cycle 240 h,∠R < ±(0.50% + 0.0005Ω) Thermal Shock:GJB-360A-96 method 107,Cond. F, ∠R < ±(0.50% + 0.0005Ω) Terminal Strength:GJB-360A-96 method 211, Cond.A (Pull Test) 2.4N.,∠R < ±(0.20% + 0.0005Ω) Vibration, High Frequency:GJB-360A-96 method 204, Cond.D, ∠R < ±(0.40% + 0.0005Ω) Lead Material: Tinned Copper Installation - max. Torque: Using a M3 screw and a compression washer mounting technique is 0.9Nm