Ort der Herkunft |
Fujian China (Mainland) |
Marke |
jenn-dong |
Modell-Nummer |
JS-ACR |
Energiequelle |
Wechselstrom |
Mute |
Ja |
Capacity:1.35 34.2 Nm3/min Dew point temperature: -40oC Cooling:Air-cooling Air inlet temperature: 0.7MPa Air inlet pressure: 50oC Ambient temperature: 32oC Follow the criterion of ISO9001 GB150 QS and pressure vessel inspection standard to manufacture strictly in order to make sure the product safetyhigh-efficiencycredibility to operate in long term. It is combined refrigerated compressed air dryer, adsorption dryer and precision filter perfectly. Save the tubing and lower pressure drop and higher system efficiency. Regeneration air volume just need 5% of capacity. Increase the heat transfer area of heat exchanger. Which could increase the heat transfer efficiency and make sure the stability the dew point of machine. The High-efficient air-water separate device matching excellent auto drain valve could discharge condenser water out off machine steady. Safety and reliable protection device( The machine has high precision protection device, such as high pressure switch, Low pressure switch, antifreezing switch, overload relay, and so on) The control panel of microcomputer(optional) of E-CTRL in Jenn-dong is a real time operating system based on the advanced microprocessor. It is controlled and monitored by concise user interface. User can identify the malfunction at the first time to make sure the sensitive location. At the same time, E-CTRL also collocates remote control port and joint control port to satisfy the special request by user. All the refrigeration parts, control element, pneumatic valve and control valve are adopt international excellent brand and match special design of fueling system and oil recovery system. Which can prolong service life stability ,and also accord with the concept of environment protection by Jenn-dong. Valve switch is controlled by microcomputer program controller with performance stability to make sure no expire phenomenon when switching adsorption tower and avoid impact to sorbent by air flow. It could prolong service life of sorbent. Our product also accept custom-made with special request(Capacity is large 34.2 Nm3/minspecial material-70dew point temperaturehigh pressure more than 0.98MPa special control, and so on.)