Luft-Luft-Wärmetauscher

The material of Aluminium coreThe cross flow aluminium core is made of seawater corrosion resistant hydrophilic aluminum foil and galvanized sheet framwork. process by special technics,high heat transfer efficiency,easy to maintain and long service life. Punctiform air channelFive layer curring 45°angle 90°angleWorking principleWhen the different tempreture and humidity exist in the two air streams,the transfer of humidity and heat will be occurs. Then the ourdoor air and exhaust air will be completely separate,avoid the exchange of odor and moisture.Two air streams cross enter into the heat exchanger, ourdoor air and exhaust air exchange the energy through the plates,then tempreture transfer from the hotter side to the colder side, humidity transfer from the bigger side to the smaller side,so as to recover energy from exhaust air. Cross flowFeature1. Cross flow plate heat exchangeradopt high quality seawater corrosion resistant hydrophilic aluminum foilas heat conductor, process by special technics,high heat transfer efficiency,easy to maintain,and long service life features,etc.2. Five layer curring,corrugated undercut,the air tightness up to 99.9%.3. Module structure,different size ofedges and superposed thickness to be choice.4. No running components, and low maintenance cost.5. Compact structure, small volume and suitable for various occasions.Production technology1.The face of heat exchangerprocess with strengthened heat transfer stamping, increased the 10% heat transfer area.2. Adopt stamping convex round as air passage support, guarantee the high strength and tightness of Channel, high fresh air and exhaust air bearing capability.3. Cross channel between ourdoor air and exhaust air, separate by aluminium foil,entry edge and exit edge process with five layer crimping techniques,have higher edge intensity and more reliable seal.4. All joints are airproofed by airproof glue, ensure that theheat exchanger has excellent air tightness.Remark: Corrugated air channel available for application,which process by spot-face airtight technology,solved the penetration and pollution problem which exist in spot-spot technology,completely stop exhaust air pollute outdoor air.Model range Demension (mm)Plate distance (mm) ABC90/C45On request≤600On request≤1000On request2.0-6.0Remark:The section size,height and plate distance of core can be produced on request,if the required sizes are out of our maximal one-time molded size,we also can provide combination type core,the efficiency will the same with requested. Applied range 1.Cross flow heat exchangers specially suitable for big indoor and outdoor temperature difference and small humidity area, especially for no return air occasion. 2. Apply to recover energy in room ventilation system. 3. Apply to recover energy in industry ventilation system. 4. Apply to recover energy in industry heat recovery system. 5. Recover cold in summer and Recover heat in winter. Authentication:All are RoHS compliant! Welccome to contact us!