Low Power Daten RF Module HR-1020

Technical specification of HR-1020low power data RF module:Serial numberItemParameterNote1Modulation modeGFSK/FSK2Work frequency420.00 450.30/860 875/910 925MHz3Transmission power10dBm(10mW) 4Receiving sensitivity-115 -118dBm5Channel amount8/16/32channelUser setting6Transmitting current<40mA7Receiving current<20mA8Sleeping current<3uA9Interface velocity1200/2400/4800/9600/19200/38400bps10Interface modeUART TTL/RS-232/RS-485User setting11Power supply+3 5VDC12Working temperature-25 to 80°C13Working humidity10% 90%(relative humidity without condensation)14Dimension47mmx26mmx10mm15Reliable transmit distance800m Feature of HR-1020 Low Power Data RF Module:1. low power transmission with the transmission power of 10dbm/10mW.2. ISM frequency band , requiring on application of frequency point.Carrier frequency of 433MHz(HR-1020 F433), 915MHZ(HR-1020 F915), 868MHz(HR-1020 F868).3. Long transmission distanceWithin the range of visibility, the reliable transmission distance is >800 m when the antenna height is greater than 3m (BER=10-3@1200bps). 4. Multi- channelThe standard HR-1020 configuration provides 8 channels. If the user needs, it can be extended to 16/32 channels, meeting the multiple communication combination mode of the user. 5.Dual serial port, 3 interface modesHR-1020 provides 2 serial ports and 3 interfaces, with COM1 as the TTL level UART interface and COM2 as user defined standard RS - 232/RS - 485 interface (user only needs to plug/pull 1 bit short circuiter and energize it to make the definition).6. Low power consumption and sleeping functionFor receiving, current is <20mA, transmitting current is <40mA, and sleep current is <20uA.