Lochboden Adiabatic Pins

BASE SIZE:25x25mm /35x35mm /40x40mm /45x45mm /50x50mm all are standardPIN DIAMETER :1.70mm for 25mmx25mm base2.67mm & 3.00mm for both 35mm or 50mm base are standard.Other sizes available by special order only.PIN LENGTH :From 20mm to 150 mm are standard.other lengths available by special order.PIN MATERIAL:1.70mm pin is Aluminum2.67mm & 3.00mm pin are Low Carbon Steel.Also available by special order in all stainless steel or all AluminumPIN PLATING :Galvanized costing is standard. Yellow White and Blue Gal. are availableWASHERS :Self - locking washers are available in a variety of sizes, Shapes. and materials.TO ORDER OR SPECIFY, PLEASE GIVE :Item no. /Pin Dia. /Pin length /MaterialRecommended assembly method1. Operation at ambient temperatures between 15 and 25° C.2. Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.3. Remove the protective release paper taking care not to touch the adhesive.4. Place the hanger in the required position and press the base against the surface to be insulated5. Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hoursBASE SIZERecommended quantity of hangers each pin (kgs)Temp.23Temp.28Temp.40Temp.6035mm×35mm1.301.200.800.5040mm×40mm1.701.601.000.7045mm×45mm2.152.001.300.9050mm×50mm2.652.501.601.10