Laser-Entfernungsmesser Ferngläser

Two. Technology Specifications 1.Measurement Range10-600 meters 2.Measurement AccuracyAccurate to within +/-1 meter 3.Time for one-round measurements0.3 second 4.Two kinds of Targeting Mode: STANDARD and SCAN 5.Meters/Yards mode designations 6.+and .Reticle for targeting 7.With status of laser display and receive 8.Low battery indicators 9.Automatically switch off delayed 10. Memoriser to keep setting speci. 11. Using weather environment: -10 to +50 Degree 12. Battery: CR2 Four. Operation 1.The Laser Rangefinder comes with two buttons of Setting Button and Fire Button. 2.Fire Button activates the display and laser measurements. 3.Setting Button completes the settings of LCD display and measurement function. 4.Switch onTake a longer than one seconds to press Fire Button to switch on it. 5.Distance Measurement: Just click on Fire Button, then the equipment starts to be in status of distance measurements. While LCD showed targeting mode of STANDARD and rangign data also appeared on LCD screen. 6.Scanning Measurement: Continuously press Fire Button, then the equipment starts to be in status of scanning measurements. While LCD showed targeting mode of SCAN and provided continuous distance measurements as moving targets in the field of view are scanned. 7.LCD DisplayIn order not to influence viewing, the word of STANDARD or SCAN on LCD will automatically disappear. During of measuring, the distance measurements data will be converted into --- if encountered bad weather. As the way, it will be converted into OVE if beyond its measurement range or weak reflectivity of target.will be moving as running water indicating display, receiving and strength of laser. 8.Measurement unit settingTo be into status of measurement unit setting by press setting button, M and Y will display and flash by turns as setting button selected. Then you can select one kind of unit to confirm by press Fire Button. To confirm which kind of reticle for targeting as the same way. 9.When battery power is low, on the LCD will flash. You should change a new battery on time. 10. All setting will be kept into the memeriser to avoid resetting again.Five. Optical Specification 1.Diameter of Objective lens26mm 2.Magnification7X 3.Angle of View6° 4.Exit Pupil Diameter3.7mm 5.Diopter Adjustment(±5) Adjustable eyepiece to compensate for an individuals eyesight.