Kupfer verkleidet Aluminium und Magnesium-Legierung Draht (CCAM

copper clad aluminum and magnesium alloy wire: Specifications Tensile Strength M pa Extensibility % Conductivity % Resistance 20 mm2/m Density g/cm3 CCAM-10A --------------- 5%-15% 59.10 0.029932 3.45 CCAM-10H --------------- 57.32 0.030859 CCAM-15A --------------- 61.15 0.028928 3.75 CCAM-15H --------------- 59.31 0.029824 1. OD: 0.10mm-8.25mm 2. Tensile strength: 138-205Mpa 3. Enlongation: 10%-15% Copper clad Aluminium and Magnesium Wire advantages : (1) Adopted international advanced welding technology in the production of coated, Jing tong above grade level by 99.97% copper, copper layer of high density, good conductivity; Copper and Aluminum Core line among the metallurgical copper layer evenly distributed along the circumferential direction and vertical, concentricity good. B566-93 various product standards and technical specifications in accordance with ASTM Standard E : SJ/T11223- 2000 as copper wire, "acceptance. (2) Under the same conditions as in weight and diameter, the length of copper wire is 2.6 times than the pure copper's length. This will greatly reduce the cost of production lines. And it can reduce the raw materials largely for the buyers. (3) Compared with the pure copper, cooper wire is of no value for the thieves. Because the separation is almost impossible. Therefore, it can add security. (4) It is more malleable than copper, does not like aluminum would form the insulating oxide, easier processing. And better conductivity. (5) Copper wire has light weight, easy to transportation and installation. It also can reduce labor costs. (6) Because the filament has the high tensile strength, it makes the customer un-interrupted in the using (7) Thread is not crisp; (8) High combination between copper and aluminum, it is easy to pull and has high rate of finished products