Kunststoff-Einweg-Löffel Formen

Dessert spoon mould -Cavity numbers: fun consecutively from cavity 1 at top of tool down to max no -Ejector pin: ejector pigs are to be of European standard each ejector pin must be individually indentified along with the relevant hole position(head thickness 3mm) -Push backs:the ends of each push back pin is to be tapped with a suitable metric size to aid maintenance. -Runner design:the runner system on all tool needs to be balanced to within +-2%. -Degating:where possible parts are to separate from runner after mould operation. -Assembly drawing:full scale tool assemble drawing are provide.in paper form and electronically with each tool. -Water circuits:pressure test all water circuits up to 8Bar.water circuits to be tapped 1/4BSP -Mold be free from burrs and sharp edges. -Lifting holes:each individual plate on the molds is to have a suitable lifting hole to aid maintenance. -Video of mould trial by CD/Mail.