Kostengünstige Rotationstrockner (Jincheng Brand)

Cost-effective Rotary Dryer 1.Rotary dryer characteristics: 1:high productivity 2:no harm to environment 3:stable performance 4:easy to adjust and maintain2.Rotarydryer description: rotary dryer, also known as drum or drum dryer drying equipment, is the most common and widespread application in mining industry. It is widely usedtodry magnetic metal and nonmetal materials, floating clay ore and cement,coal slurry and other industrial materials. 3.Rotary dryer work principle: 1.Wet materialsare carried to the hopper by the Belt Conveyor or bucket elevator, thenthrough the feeding pipe the materials are sent into the side.2.Set feeding tube inclination angle in order to make the flow of material mooth. Dryer cylinder is located slightly in a slope.Materials are put in from the higher end , heat is sentin from the lower end.3.With the rotation of the cylinder materialsrun to the lower end under the force of gravity.4.During moving forward in the cylinder ,the materials are dried directly or indirectly from the heat carrier, then sent out at the the discharge side by the belt conveyor or screw conveyor.5.On the tube wall,there are specialboards,therole is to expand the contact surfacebetween materials and airflow ,so as toreduce dryingtimeand to promote material progress.6.Before release materials, make sure the gas go through the filter to reducethedust content.4.Rotarydryertechnicalparameters:Type (mm) Tilt (%) Speed (r/min) Inlettemperature(°C) Power (kw) Capacity(t/h) Weight(t) 600×6000 3-5 3-8 ≤700 3 0.5-1.5 2.9 800×8000 3-5 3-8 ≤700 4 0.8-2.0 3.5 800×10000 3-5 3-8 ≤700 4 0.8-2.5 4.5 1000×10000 3-5 3-8 ≤700 5.5 1.0-3.5 5.6 1200×10000 3-5 3-8 ≤700 7.5 1.8-5 14.5 1200×12000 3-5 3-8 ≤700 11 2-6 14.8 1500×12000 3-5 2-6 ≤800 15 3.5-9 17.8 1800×12000 3-5 2-6 ≤800 18 5-12 25 2200×12000 3-5 1.5-6 ≤800 18.5 6-15 33 2200×14000 3-5 1.5-6 ≤800 20 8-15 41 2200×18000 3-5 1.5-6 ≤800 22 10-18 53.8 2200×20000 3-5 1.5-6 ≤800 30 12-20 56