Kombinierte Typ Schweißen Stellungsregler

combined type welding positioner is installed with adjustable brackets for welding torch and cutting torch based on the structure of welding positioner. Synchronously positioned by following operation platform, the brackets of welding torch and cutting torch are flexible to direction adjustment up and down, left and right, forward and backward, as well as to angle adjustment for accurate seam alignment, which applies to different welding and cutting process. Welding positioner , there are ON/OFF knob, FORWARD / REVERSE knob,speed adjustable knob in control panel, after finishing adjusting , only need to press the relate knob to achieve automatic welding main characteristics of combined type welding positioner: 1.The rotation structure is driven by Dc motor, while stepless speed regulation can be achieved.; 2.The turning structureof worm and gear has the Combinedfunction of self-lock,and the worktablecan be turned steplessly between 0-90 ; 3.Special design of anti-electromagnetic, which reduce the hign frequency interference of TIG’s welding, and can improve the welding quality effectively; 4.A self-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder; 5.The adjustable- welding gun support can be furnished to fix the position of the welding torch; . 6.The track and air-powered tip can be furnished to achieve the function of self –holding to the workpiece. Technical data of BY-50/100 combined type welding positioner No.MODELUNITBY-50BY-1001Power input/1 Phase, AC 110 / 220V, 50/60Hz 2Horizontal loading capacityKg501003Vertical loading capacityKg25504Working table diameter(D)mm3153455Working table heightmm3704206Working table tilting angle/0-90°0-90°7Working table totation speedr/min1.5-150.7-7.51.5-150.7-7.58Rotation motorW601009Overall length(A)mm45050010Overall width(B)mm43045011Overall height(C)mm37042012Tilt center to floor(G)mm27030613Cable terminal/30-50mm230-50mm214Net weightKg314015Applicable chuck/C-125/160/200C-125/160/200