Kehrmaschine, FLM5100TQS

Features: 1. The vehicle is compactly designed. It can carry large amount of water and is therefore suitable for continous operation. 2. The vehicle adopts four sweeping discs located in the middle, V-shaped high-pressure spraying pipes and a suction mouth. Three working modes can be achieved: (1) Four sweeping discs and a suction mouth, used for cleaning road and sucking dust; (2) V-shaped high-pressure spraying pipes and a suction mouth, used for flushing road and sucking dust; (3) Four sweeping discs located in the middle, V-shaped high-pressure spraying pipes and a suction mouth, used for cleaning and suction. The multi-functional vehicle can be used all year around. 3. The self-developed V-shaped spraying pipes and auxiliary suction mouth featuring high-pressure water spraying (patent No: ZL 200620009577.X) can effectively collect waste water and garbage into the dustbin to make road surface free from dust and collected water, achieving a good cleaning result. 4. The left and right retracting arms are so designed that they can avoid barriers automatically during sweeping process. With this design no structural damage will occur to them when in contact with road curbs. 5. The touching pressure of the brushes to the ground is automatically controlled by the hydraulic system, which eliminates the uneven touching of brushes caused by the change of load(water). 6. The clean water tank and waste water tank are separately arranged to better use the space and to achieve prolonged cleaning operation. The waste water can be discharged through drain pipes and clean water can be refilled for continous cleaning operation. 7. The vehicle is equipped with patented waste water valve (National patent No: ZL200820102368.9). The valve features quick switching, effective prevention from dripping and easy maintenance. 8. The application of imported PLC module featuring integration of control frees the driver from much of the control operation pressure.- Technical parameters: FLM5100TQS SweeperTechnical ParametersChassis model Isuzu QL1100TLARY (national emission standard III) Engine model／power Kw Isuzu 4HK1-TC/129 Auxiliary engine/power Kw Jiangling 4JB1/57 Dimension(length×width×height) mm 7020×2280×2550 Maximum speed km/h 100 Sweeping width m 3.2 Flushing width m 3.3 Flushing water pressure Mpa 12 Flushing speed km/h 3-25 Oil consumption L/10000m2 3.2 SS Clean water tank volume m3 6 SS Waste water tank volume m3 2.9