JKG / W intelligente Blindleistung automatische compensatio

JKG Series intelligent controller is also called reactive power auto-compensation controller. It is designed to rise the system power factor upto a users appointed range when normal load.It can adjust the low load closedown,functionally prevent from its cast and concussion and it has strong anti-jamming capability and insensitive to harmonic wave. Technical data: 1. Basic data: Rated voltage: AC220/380+-10% Rated current: AC 0-5A Rated frequency: 50Hz+-5% 2. Controlling data: Sensitivity: 200mA(100-999mA) COSΦpreset: 0.80-0.99;preset of leave factory:0.92 Cast and cut delay: 1-120s Over voltage protection: 220(220-250V),preset of leave factory:240V; 380(400-450V),preset of leave factory:420V; 3. Usable type:JKGS.JKGL,JKGM Function characteristic: 1.The figure type COSΦmeter or numeral indicates power factor; 2.With two supervision and test system of power factor and w/o current; 3.The input resistance of current sampling signal is less than 0.1ohm,can take out directly from measurement loop; 4.It is adjustable to over voltage,lack current,devotion-limitation; 5.With two working methods of test and auto; 6.Circular cast and cut; 7.Output ways 4,6,810,12 ways. Usage conditions: 1. Altitude: less than 2500m; 2. Environment temperature: within -25 +70; 3. Air humidity: no more than 90% at +40; 4. Ambient environment: no corrosive gas,no conductor dust,no flammable,explosive medium existing; 5. The installation place: no strong tremor; 6. The flutuating range of voltage: no more than +-10%. Size mounting hole: JKGS hole size: 113 x 113mm JKGL hole size: 162 x 102mm JKGM hole size: 102 x 140mm