Isolierglas-Produktionslinie (Glass-Maschine)

Brief Introduction: Insulating glass machine LB2500P/2200P insulating glass production line has two work models, manual operation and automatic operation. These two work models can be achieved by switching over the control panel LB2500P/LB2200P Multi-function insulating glass production line include feeding section, glass washing-drying section, aluminium spacer install section, light-inspection section, panel press section and out load section Technical characteristic PLC Control, touch screen control interface High speed conveyance (40m/min) controlled by PLC frequency control Separate controller of the feeding section Low-E glass automatic recognition Stainless steel washing-drying section 3 pairs of soft nylon brushes 2 separate water circuits Water tank and pipe feature easy washing Distance between the brushes is adjustable Easy brush roller replacement High speed washing Wringing roller Low noise and complete closed drying room Infinite variable speed brushes Dark color and cold light inspection back plate Aluminium spacer decorative bar installation section Alu-spacer edge distance adjustment device with digital display Rear and front glass support Step IG unit available Hydraulic press plate 500mm open in plate press section for easy repair Automatic alarm of press plate repair (open and close) Automatic tilting unload section Automatic output statistics Main technical parameter (LB2500P): Total power: 32KW Glass washing thickness: 3mm-12mm Max. insulating glass thickness: 40mm Min. glass size: 400x200mm Max. glass size: 2500x3000mm Max. washing speed: 8m/min Max. speed: 40m/min Work height: 500±20mm circulating water: 0.5Ton/shift Quality of water: conductivity≤200μs, hardness ≤18 degree Air consumption: 800L/min Overall dimensions: 21000x2200x3700mm (LxWxH)