HSGDS Series High-Low Temperatur Damp-Heat-Test C

Scope of Application The test equipment is mainly applied to industrial products, constant, alternating hot and humid the reliability test of the product and other relevant characteristics of the physical environment simulation testing to determine product performance, is still able to meet the scheduled requirements, in order to facilitate product design, improve , Identification and factory inspection purposes. Performance Feature:Equipment, mainly from the box, heating systems, cooling systems, air circulation system and control system.Perfect test box design, the use of CNC machining shape, and using non reactive handle for easy operation.Refined door seal with silicone rubber, resulting in high and low temperature aging and hardening does not exist.Insulation system uses ultra-fine glass fiber or rigid polyurethane foam insulation area filled to ensure that the internal box temperature.Independent heating and cooling system to make devices more efficient heating, cooling, refrigeration systems for the automatic control and security coordination system.Powerful multi-wing air circulation, to avoid any dead ends, can test the temperature distribution within the region.Imported from Taiwan intelligent temperature control temperature and humidity control device, automatic calculation of PID function with high accuracy.Equipment standardGB/T2423.1-2001 GB/T2423.2-2001GB/T2423.3-2006GB2424.1-89 GB/T2324.2-1989.GB/T2423.1-1989.GB/T2423.4-1993Technical Parameters:Model HSGDS-50 HSGDS-100 HSGDS-150 HSGDS-225 Interior Dimension (mm) 350×350×410 400×450×550 500×500×600 500×600×750 Overall Dimension (mm) 880×840×1480 950×940×1680 1020×1000×1720 1010×1100×1940 Model HSGDS-408 HSGDS-800 HSGDS-1000 HSGDS-1500 Interior Dimension (mm) 650×750×830 800×1000×1000 1000×1000×1000 1500×1000×1000 Overall Dimension (mm) 1210×1140×1960 1280×1480×2030 1480×1480×2030 1980×1480×2030 Parameters Temp. range Model A:-20°C +150°C Model B: -40°C +150°C Model C: -70°C +150°C Humidity Range 30% 98% R.H Humidity bias +2 -3%R.H Temp. fluctuation ≤±0.5°C Temp. uniformity ≤2°C Heating rate 1.0 3.0°C/min Cooling rate 0.7 1°C/min Materials Shell material Electrostatic spray quality A3 steel Liner material Imports of high-quality SUS304 stainless steel plate Insulation materials Ultra-fine glass fiber insulation cotton / rigid polyurethane foam Door seal Double resistance to high and low temperature aging and hardening of refined silicone seal Cold and heat exchange system Controller Imported intelligent temperature and humidity control meter / Suzhou "TINKO" temperature and humidity control meter Circulatory system Temperature low-noise motors, single cycle, plus the long axis, stainless steel multi-leaf type centrifugal fan Water supply Electronic device controller automatic control of liquid, and more than recycled water, with water alarm Humidification mode External isolated, stainless steel electric steam humidification mode occurs Dehumidification mode Condensation method using the dew point temperature of the evaporator coil dehumidification mode laminar contacts Refrigeration Unit cooling mode / Dual (cascade) cooling method (air-cooled) Condenser/ Evaporator France "Taikang" multi-stage membrane evaporator Compressor France "Taikang" closed refrigeration compressor / France "Taikang" Hermetic Refrigeration Compressors Security Devices Power overload, leakage, grounding, over-temperature protection (with voice prompts), fast fuse, compressor over-voltage protection Standard Resistant to high and low temperature heat tempered glass hollow glass windows: 220 × 180 (mm), a lighting, a test lead hole ¢ 50mm, the two sample holder, a set of casters Power supply ACø220V·50HZ/380V·50HZ