HPP150 Serie Leistungswiderstände

EBG's series HPP(Power resistors) is rated at 150Watts mounted to a heat sink. There are four configurations of resistive patterns available in the package. The increased height of the package makes this resistor ideal in applications where creeping distance must meet VDE 0160 and UL094-V0 standards. A few features of the HPP include:150 Watts at 85°C,Non-Inductive Design,Four configurations of resistive patterns,Up to 3 resistors in 1 package,Easy mounting using already existing infra-structure Resistance Range:1Ω to1MΩ (other values on request) Tolerance: ±1%, ±2%, ±5%,±10% Temperature Coefficient:±50ppm, ±100ppm, ±250ppm(at +105°C ref. to +25°C) Max. Working Voltage:500V (up to 1,000V on special request) Power Rating at 85°C:150W (others upon request) Voltage Proof:5,000 VDC, 3,000 VAC Heat resistance to cooling plate: < 0.47 °K/W Capacitance/mass: 45 pF Working temperature range:-55°C to +155°C Max. torque for base plate(static):1.5 Nm. M5 screws Air distance contact to contact: Configurations 3:Contacts 1 and 2 resp.3 and 4 without Fast-on-Plug: 9.2mm with Fast-on-Plug: 8.2mm Configurations 4:Contacts 1 and 4 resp. 2 and 3 without Fast-on-Plug: 21.9mm with Fast-on-Plug: 20.9mm Configurations 5:Contacts 2 resp. 3 and M5 -mounting screw with washer without Fast-on-Plug: 16.3mm with Fast-on-Plug: 15.9mm Configurations 6:Contacts 1 resp. 4 and M5 -mounting screw with washer without Fast-on-Plug: 15.5mm with Fast-on-Plug: 15.0mm Creeping distance: Configurations 3:Contacts 1 and 2 resp. 3 and 4 without Fast-on-Plug: 20.0mm with Fast-on-Plug: 19.0mm Configurations 4:Contacts 1 and 4 resp. 2 and 3 without Fast-on-Plug: 27.4mm with Fast-on-Plug: 25.8mm Configurations 5:Contacts 2 resp. 3 to base plate without Fast-on-Plug: 20.2mm with Fast-on-Plug: 19.8mm Configurations 6:Contacts 1 resp. 4 to base plate without Fast-on-Plug: 19.5mm with Fast-on-Plug: 18.9mm