Hotmelt Dichtstoff für Isolierglas

JOINLEADER 888HOTMELT SEALANT Description: JOINLEADER 888 HOTMELT SEALANT is solvent free one component sealant sealing insulating glass units. It has good adhesion to glass , aluminum and galvanized or stainless steel. And have very low water vapor and gas transmission rate. Where to use: It is processed using adequate tank or barrel melting equipment. Recommended proceeding temperature is approx. 160°C to 180°C Surface to be bonded should be dry , clean and free from dust or grease Technical data : Base: Synthetic rubber Color: black Consistency: rigid material, process able only at elevated temperature 160°C to 180°C Density: approx.1.17g/cm3 Peel resistance: above 6N/mm Gas permeability:below 0.01g/m2h Water vapor transmission rate: below 0.2g/m2d Volatile content: below 0,7% Penetration approx: 25 1/10mm Packing: 3kg./piece, 36kg/carton..