Hot Oil Einheit

Brief Introduction 1. The pipeline of this unit is designed reasonably and can meet different requirements of working conditions such as high temperature & high pressure, high temperature & low pressure, low temperature & high pressure, and low temperature & low pressure. 2.This unit features high thermal efficiency. It far exceeds domestic congeneric equipments in thermal efficiency on the same time. 3.The temperature can be automatically controlled. It functions automatic detection and alarm, which automatically stops to assure the safety of equipment and personnel in case of overpressure. 4.This unit is designed to carry out cleanout and heating operation in land or desert oilfield. Its main applications are as following. ² Clean the wax and other objects in pipeline. ² Clean the pipeline by pumping hot oil into the pipeline before oil well overhaul. ² The unit is equipped with a high pressure pump and oil tank and thus can be used as a direct pressure supply device. Main Technical DataChassis KENWORTH T800/6×4Chassis engine CUMMINS ISX-450(450HP@2000RPM)Chassis transmission Fuller RTLO16913A 13-speedTriplex plunger pump OFM600 (3.5″ Plunger)Max. working pressure 70MPaBoosting centrifugal pump 3×2×13 (closed impeller)Rated displacement of centrifugal pump 1800L/minFluid supply pump BOWIE PUMP 3″Rated displacement of fluid supply pump 744L/minHeater JB2 oil fired burnerHeating capability 8m Btu/Hr(2679.5kw/hr)Fuel DieselMax. heating temperature 121 degreeVolume of liquid tank 10m3Unloading total weight 21000kgOperation total weight 29000kgDimension (L×W×H) 11980×2500×3900mm