Hochgenaue Durchmessermessung Messgerät LDM-150

High Accuracy Diameter Measurement Gaugeis the high-accuracy survey installment that uses the laser scan to carry on Non-contact the on-line measure. Mainly used in a variety of wires, cables, pipe production line, the measurement of outer diameter and adjust the extruder screw speed or traction speed, to control the purpose of OD. Can also be applied to the outer diameter of workpiece and size measurements. Model Measuring Range Differentiation Accuracy LDM-80 0.2-80mm 0.001 ±0.02%×(Reading)±0.005mm LDM-150 0.2-150mm 0.001±0.02%×(Reading)±0.005mm The performance indicators: Measurement: Laser scanning Laser: Visible red semiconductor laser Laser output power: <2mW Operating voltage: 220V ± 15% 50 - 60Hz Operating temperature: -10 40 °C Humidity: <85% RH Work mode: continuous Power consumption: <30W External dimensions: Dimensions: LDM-80/LDM-150 Measuring head: 910mm×80mm×292mm The Device with the following Characteristics: 1. Can be connected PLC, industrial computer. 2. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect. 3. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption. Remote Display Controller (Model:DDC-6) 1. It be used to remote display and control. 2. It Can control the speed of DC motors, VVVF motor(extruder or the tractor). 3. It's suitbale for Laboratory use. 4. It will alarm,when the diameter go beyond the the set tolerance. 5. With RS485 It can connect to PLC industry controlling computer.