Hoch großen RTV-Silikon-Dichtmittel

high great RTV Silicone sealant Color: Grey, White, Black, Red, Transparent color Viscosity: 1500Cps Tensile Strength: >= 1.2Mpa Max Extention rate : >= 200% Solidification : >= 1mm/24h Operation time: 30min Shelf Time :1 year (≤25°C) Working Temp: -70°C- 260°C Resist from high temperature, stable and long-lasting function, excellent replacement of plastic gasket, asbestos gasket, soft wood gasket, paper gasket, quickly repair and seal different size of cracks Clear RTV silicone gasket maker is single-component, non-slumping, Acetate-curing rubber paste that cures to a permanently flexible silicone rubber on exposure to atmospheric moisture at room temperature Features: 1) Forms to any shapes instantly, and can cure fast 2) Resists cracking, shrinking and migration caused by thermal cycling 3) Works up to 260ºC 4) Mainly used for valve covers, water pumps, oil pans, axle covers, thermostats, trans. mission pans, timing chain covers, and oil pump flanges 5) Weight: 20g/30g/32g/85g/300ml User's Guide: 1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease; 2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size; 3. Apply continuous, uniform 1 4mm bead around perimeter of one surface. Completely surround all bolt holes; 4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond. Notes: 1. Leave thickness for gasket when reassembling, Don't over-tighten the bolts. 2. Sealant releases acetic acid (vinegar-like odor), Used with adequate ventilation. 3. Replace the cap after use