High-Tech-Solar-Ladegerät für iPhone3G / 3GS / 4G

Solar charger for iphone 3G/3GS/4G JN-05 Technical Parameters 1.Output power: 0.4W 2.Open circuit voltage: 5.5 V 3.Lithium battery: 1000mAH 4.Rated output current: 700 MAH 5.Size & weight of charger: 125x64x25 mm, 135g Suitable for most brands of mobile phones and any mobile digital product which with USB port, simply changing the different connectors provided. Product Features 1. Use the sunlight to charge your phone mobile phone. 2. The built in lithium battery can be charged by sunlight, AC power. 3. The built in battery can also be used as a charger if no sunlight is available (can provide up to 150 minutes of talk time depending on handset). 4. Suitable for a wide range of phone mobile phone. Operating Instructions 1. Insert phone in the interface of the phone sheath. Turn on the phone sheath power switch to (ON), then charging sheath will charge for phone, rechargeable volume indicators will be luminous, and I=25% electricity, I,II=50% electricity ,I,II,III=100% electricity . 2. after phone is fully charged, please press the sheath power switches to (OFF). 3. Connect USB cable to the computer to charge for silica sheath, with power increasing, indicators will change according to the charging time. 4. Put the production in sufficient sunshine ,solar panel in the sunshine ,turn on the switch to (ON),it will charge for the cell phone directly ,Turn off the switch to (OFF),the electricity will be stored to internal battery automatically ,Under sufficient sunshine ,charging within12 hours will be full. 5. When power indicator is off, the electricity of internal battery is used up; it can be charged by method of 3 and 4. Charging your mobile phone with the Phone Solar Charger 1. Try to phone 3G's battery for operation. When phone 3G's battery electric energy is insufficient. Just turn on the charging switch "I" to charge.2. Please turn off the charging switch "I" in time when phone 3G's battery electric energy is Energetic.(can save built – in battery electric energy in the sheath)3. While not using. Please put charger under the sunshine. Electric energy is supple ended and under.4. Please make sure to use original USBC/DC adaptor for chargingFAQ :( Frequently Asked Question) ASK: Why after phone 3G puts into charger sheath, no charger symbol indicates on phone3G screen? Answer: Please push the operation switch” I" to "on" .and see if the charger light "J" is on in red. Or click electric power button "K" see if the electric power display light is on. 1. When charging indicator light "J" is bright, please check whether phone 3G is inserted with sheath charging pulp "G" closely. 2. When charging indicator light "J" and electric power display light "L" are not bright, Please charge for it. If the above methods come to naught. Please contact sellers. ASK: Will charger sheath charge and damage phone3G? Answer: Please operate under the operation manuals, charging sheath will not damage phone3G. Caring for your Solar Charger 1. Prevent phone 3G sheath from putting in humidity or causticity conditions. Please don't use in condition higher than 70 C 2. Don’t insert and pull out phone3G from the charger sheath with very heavy strength. Don’t crush and scrape the charger sheath. 3. Keep out the reach of minor children. If any serious results caused by violating above mentioned prohibitive clauses. We will not bear relevant responsibility.