High-Speed-PVC-Tür

Introduction of High Speed Roller Door Safe, fast, smart, and tight. Improving the efficiency of logistics. Making a better working situation. 1. Characteristics and Application It adopts SEW German brand series motor, Mitsubishi Frequency-Converter and PLC, automatic induction in open and close; the high density door curtain is imported from France with transparent windows in the middle part. It has special performance in sealing, heat insulation, sound insulation, dustproof, lighting and high speed(0.5m/s-1.2m/s, adjustable) etc; it’s widely used as entrance control in the industry of food, medicine manufacturing, electronics, publishing, printing, rubber, textiles, shopping centre, warehouse, logistics, auto manufacturing etc. It’s the best choice for fast open/close and regional isolation to prevent cold air flow. 2. high sealing tightness: It’s dustproof and easy-clean, meeting the requirements of CMP. 3. High Speed in Open and Close: The door curtain is changeable and windproof (90kg/m2); it can be opened and closed by 1000 1500 times per day. With speed range from 0.8m/s to 1.5m/s, it is efficient in work and energy-saving. 4. To ensure security, our roller door would be installed with infrared device at the bottom, which provides that the door be automatically lifted if there is an obstacle under it. Its security system meets the requirements of CE. 5. Anti-attack: Whatever the door is, it may come into collision with something, which would cause damages to the door’s operation and cost a lot to repair. Our high speed door has a system of automatic-derail, which would make the door derail automatically when collision happened, and restore to its normal state in a minute without any external help. 6. Dynamism: Powered by SEW series motor, from 0.75KW to 1.5KW, 380V/3 phase, 1400r/min, new generation encoder; at the same time, it is equipped with Mitsubishi converter, programmed by micro-computer, compatible with common security device, which would make the door stable in open and close. Frequently as it is used, it makes little loss to the door. 7. Door Curtain material: High density industrial curtain (origin in France, 1.2mm in thickness) with transparent windows, making better working condition . 8. Door Frame: Cold-rolled steel plate, 2mm in thickness, with quality painting; its dense brush can stop wind and down noise. 9. Technical Parameter: Tensile strength(warp/woof) 5700/5100N/5cm, tear strength(warp/woof) 900/800N; ambient temperature: -30° +70°; Flameproof Grade: NF-pg2-503 M2 and DIN4102 B1 Color: white, yellow, blue, red Except the embedded AL bar, the door curtain is made of PVC-coated high density industrial fabric with polyester fiber and glass fiber as raw material. Internal lock is available for connected doors. 10. Requirements on Doorway: Minimum Width of Motor Side: 550mm, the other side is 150mm. Minimum Height of Headroom: 700mm. Size of Control Box: 300mm*400mm*500mm. 11. Operation: Multiple open methods are available for TS high speed door: wall switch, manual open, remote control, radar, internal lock, infrared induction, geomagnetic induction etc. 12. Cold resistance: It can keep soft at a -70°C, open and close in instant to stop cold air from invading. 13. Pest Prevention: It can reflect a special light wave to hustle pests away, so the door is widely used in food processing factory, fresh food processing center and the like. 14. Anti-Static Curtain: Anti-Static Curtain, don’t make the static electrification when friction, suitable for the factory, which strictly forbid the static. Technical parameter: width: 0.2-1.37m, thickness: 0.3-20mm, Range of anti-static: 9.0*105Ω-109Ω, place of origin: France.