High Efficiency vibrierende Zufuhr von Juxin

High EfficiencyVibrating Feeder of Juxin is widely used in ore dressing ,coal,chemical industry ,etc.It will block the material from the storage silo sent by the device . Trough Feeder can be set up on the ground ,or hoisting ore in the warehouse unloading on the mouth .Slot floor for movement back and forth ,the red for the second 20-60 times/min,stroke for the 20-200mm. Drive-stroke may be eccentric appropriate adjustments for the eccentricity of a half-stroke ,According to some of the concentrator production practice ,the sticky ore,eccentricity should not be less than 30mm.Trough of the feeder precursors trough is expected to be about the width of the maximum size of 2-2.5 times ,Trough of the largest feeder to meet the particle size is less than 500mm of iron ore to the mine .The selection of the most common specificaions are 980x1240 trough feeder ,the feeder size for the 350-0mm ,for a 400x600 E-crusher feeding equipment . The Specifications of Trough Vibrating Feeder : ModelMax Feeding Size (mm) Round Trips/min Feeding Capacity(m3/h)MotorOverall DimensionsL×W×H(mm)Weight(t)ModelPower(kw)300×30020048.475-19Y90L-41.52320×600×6000.592400×40020048.4710-30Y100L1-62.22350×725×6250.64600×50020038.915-50Y112M-442750×910×8551.054700×50020038.920-60Y112M-442780×1010×8601.100980×124020023.736-90Y132MS-45.52845×1180×12801.676