Haus Innendekoration PU-Leder

1. Product Introduction House interior decoration PU leather which is also called inner wall leather is taken use as the household upholstery material in the modern tanning process technology. Compared with traditional wallpaper, it not only takes the advantages of traditional wallpaper ln sound-proof, heat insulation, luxury and easy decoration also keep disadvantages from easy warp, non anti-stain and unrepair after wrinkle, with the charactcrs of durability, anti-aging, anti-stain, durability, anti-aging, anti-stain, fire retardance and eco-friendly. It is the selected decoration material for inner decoration. 2. Product Features: 1)Eco-friendly:made from waterbome polyurethane, without toxic. 2)Excellent physical performance: it is composed with chemical solvent which contains anti-acid, anti-alcohol and water resistance to avoid dirtv wet & aging issues. 3)Perfect effeet: fresh looking, smooth &soft, breathable 4)Easy to construct: it can be used in the after-polishing porcelain-imitation coating or latex paint surface,which can reduce construction cost and time by hand and without any large size equipments. Compared with powder coating, paint and traditional wallpaper, house interior decoration PU leather does not harm to the body because of no formalclehyde & mcthylbenzene left. 5)Compared with powder coating, paint and traditional wallpaper, house interior decoration PU leather does not harm to the body because of no formaldehyde & methylbenzene left. 1.TOOls: Bucket, ruler, tape measure, utility knife, aligment line, cloth, sandpaper, brush, scraper. 2. Make the wall smooth Polishing the wall, and make it smooth,dry, solid and free bump, free dirty, free flaking. Joints, gaps, pits of the wall should be filled with gypsum powder, and pulished into smooth. 3.Cut the home interior decration leather Measuring the Length and width of the wall. Calculating the area of Wall before cuting the home interior decration leather, 5cm should be a plus when you measuring the length of the home interior decration. Smmetry should be considered when it comes to home interior decoration leather with flower patterns, so the cutting length should be increased appropriately based on the length of repeating pattern. 4.GLue: Water-based glue is painted on tHe bacK of home interior decoration leather which has been cutting 5.WaLLpaper post Vertical alignment at a distance of 50cm from wall angles with the aligment line, post the first home interior Decoration leather according to the baseline from top to bottom. Make the home interior decoration leather smooth with scarper. Order : from top to bottom, from the middle to the surrounding to remove air bubbles and excess glue. Aligning the first flower-shaped pattern when posting the second one. Cuting off the extra leather on the sides.