Hauptschalttafel

Main switchboard EGCP(Z) serial main switchboards are used for the ship low-voltage power distribution,especially develop for marine using,it’s suitable below DC 230V,AC 400V/50Hz or 440V/60Hz electric wire netting.The single generator controls power is 12KW-900KW,for the control,monitor,protect the generator,electric lighting network. Rated voltage400V AC,may chooseFrameMolding plate or large box-type frameRated currenMaximum electric current 600AProtect gradeIP21(IP22,may choose)Rated frequency50/60HzPower line inletThe back bottom or the top(top,may choose)PatternThe entire seal fixed panel console model multi-cabinets combinationHandrilFront and backMain performance 1.The controllable generator quantity;main bus capacity biggest 6000A 2.Use power manage system in switchboard. 3.The controllable It has the selective automatic start/stop and automatic Parallel operation,automatic load sharing power station manage,heavy load request and so on; 4.This power management system has standard Rs485 or Rs232 communication control interface; 5.Range widely of generator control condition and is parameter setting; 6.This system still can show various kinds of working state and failure of thw switchboard Satety,reliable,good maintainability 1.Each panel is seqarated by partition board to avoid affecting the control circuits of other panels if break down; 2.Switchs can be chosen as the fixed type or the drawer type; 3.Controls parts install in the front of panel; 4.Have good air convection;the temperature rising of switchboard can be controlled effectively; 5.The power distribution system has installed the power management system,it can record the working state and fault state of switchboard and it has good maintainability; 6.Power manage system has provided the automatic start of standby generator and it make the good continuity of power supply.