Handling Tisch

Handling table with press My company is professional for designing and manufraturing handling table more than 10 years. And we always focus on improving our product. Our handlingtable is siutable for the press from 600MT to 3500MT. In this range, we will use conveyor type. If more than 3500MT press, we will use another type of conveyer. The conveyors of handling table can be easily and fast changed, and compare with the traditional type, the cost only increase 5%. Further, We only use national standard material for making the machine. So, we have confidence that my machine can run in a good condition in two years. When your handling table has the following trouble, you can shoot follow the form say. TroubleReasonsSolution1.The table does not move.1. Electric components or motor is damaged. 2. Chains break up. 3. The seal of hydraulic cylinder or valve is damaged. 4. Pressure of hydraulic station is not enough or overload.1. Check and fix up the electric components and motors. 2. Check and fix up the chains. 3. Check hydraulic cylinder and valve working situation. 4. Check the oil volume and working temperature, also check the hydraulic components.2.The clamps of stretcher do not work 1. The seal of hydraulic cylinder is damaged. 2. The valve is damaged. 3. The hydraulic station can not work normally. 4.The related electric component are damaged. 1. Check the hydraulic cylinder. 2. Check the valve’s working state. 3. Check the hydraulic station. 4. Check the electric components. 3.Finish saw: Blade doesn’t rotate or pressing plate doesn’t work1. Motor is damaged. 2. The belt is loose. 3. The valve is damaged. 4. Electric components are damaged. 5. The seal of pneumatic cylinder of pressing plate is damaged.1. Check the motor. 2. Check the belt. 3. Check the hydraulic component and station. 4. Check the electric components. 5. Check the pneumatic cylinder.4.Gauge mechanism doesn’t work or not exact.1. Seal of pneumatic cylinder is damaged. 2. Compressed air pressure is not enough. 3. Some components are loose. 1. Check pneumatic path and cylinder, components. 5.The felt belt deviates 1. The adjusting wheel is loose.1. Fasten the adjusting wheel.