Hammer Brecher und Teilmaschine

Typical ApplicationsThis machine is specially suitable for making the samples with the size of less than 13mm, 6mm or 3mm (adjustable) and the weight of 1/2-1/16 of feeding material for component analysis (Such as the departments of electricity, coal, metallurgy, nonferrous metals, chemical, building material, geological and scientific research and so on.) it makes dividing automatically after quick impact crushed the medium-hard material continuously or intermittently. (The inspections show the sample accuracy of this machine meets the requirements of national standard and without any systematic difference.)Advantages1. It is suitable for crushing the coal and the material with medium hardness or high moisture content.2. It can achieve the crushing, mixing and dividing continuously without manual operation and also can avoid the manual operating error.3. It is also capable for high moisture content material without blocking up, moisture loss and quality change.4. The discharging size can be adjusted flexibly.5. All moving parts have the safeguards which meets the requirements of work safety.6. Full-sealed design, no dust pollution, easy for collecting samples and meets the environment requirements.7. The samples after division are representative.8. It can work normally on the flat ground without fixing any base.9. The machine is environment-friendly and multi-functional.Technical ParametersGM/PC Hammer Crushing and Dividing MachineModel No.GM/PC-1/8GM/PC-AFeeding size (mm)≤150mm≤150mmDischarging size(mm)≤13mm,≤6mm,≤3mm(adjustable)≤13mm,≤6mm,≤3mm(adjustable)Division ratio (adjustable)About 1:8About 1:2,1:4, 1:8, 1:16Handling capacity (kg/h)800-1500Moisture(total moisture) ≤18%Motor Power (kw)4Dimension (mm)380Working power supply(v)920×830×1600Total weight(kg)420