H54-2 Raw Öltank-Innenwand antistatische Beschichtung (

H54-2 Raw Oil Tank Inner Wall Antistatic Coating (Primer/ Finish Cover; Two Component) Product description Ø Based on epoxy resin, electric filler & anticorrosion filler, added agent and modified amine curing agent. ØPrimer/ finish cover; Both two component; Crosslinking cured paint. ØExcellent adhesive attraction, wearing quality and excellent resistance against corrosion, acid, alkali, salt, oil, water and wet. ØLong term bearing in raw oil and water under 60 80. ØHigh solid content; easy operating. Recommended uses Appropriative for the inner wall of raw oil cabin and tank. Physical parameter ColorPrimer: gray; Finish cover: gray GlossHalf glossy Theoretic coveragePrimer: 200 g/; Finish cover: 230 g/ Specific gravityPrimer: About 2.30; Finish cover: About 1.25 Desiccation time25: Primer: surface dryness≤1h, Actual dryness≤24h Finish cover: surface dryness≤2h, Actual dryness≤24h Absolute solidification25: 7 days Flash point25 Storage12 months Attention Ø The base should be descaling, removing oil, removing dust and others. Ø If the foregoing layer is painted too long, roughening with waterproof abrasive paper to remove the dust before painting the next layer. Ø All the tools should be clean. The paint cant be mixed with water and other waste. Using up the paint after mixing in 8 hours. Ø Protecting the film before dry. Ø Store the paint under cool, dry condition. Avoid sunshine and fire. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specifications Primer: A: 35kg container; B: 35kg containerFinish cover: A: 24kg container; B: 8kg container protective coatings, anticorrosive coating, epoxy resin coating