H Strahl Gantry Schweißmaschine

MH-1000 Beam gantry welding machine Major technical parameter Height of the flange board: 200-800mmThickness of flange board: 6-40mm Height of the web: 200-1500mm Thickness of the web: 6-40mm Length of the usable work piece: 4000-15000mm Welding speed: 240-1500mm/min Speed of back stoke: 3000mm/min To-and-fro stoke of the welding arm: 800mm Welding position: fillet welding at flat position Size of the usable welding wire: 3.2-5mm Flux recovery machine: 100kg×2 Machine power: 8.2kw Electrical system: Siemens .Performance MH-1000 Beam gantry welding machine is specially designed for the welding of H beam. It realized the combination of welding control and trolley control and can de operated. Driven by alternating current converter; stable speed, digital display of the linearity speed, good reliability, there is no three-axle mechanical tracing arc guiding mechanism; floating type tracing to guarantee that the welding torch targeting at the welding seam accurately. The power ling for the submerged arc welding can move on the portal frame to shorten the length of the control cable and the welding cable as possible to quicken the response, reduce the pressure and stabilize the welding current. provide goods bound and compose parts Mail frame: include gantry, travel unit, carriage wire-feeding tube and attachments etc. Welding arm and its carriage including :2sets of welding arm elevating unit arm travel unit, carriage and its attachmentsFlux recovery system including : 100kg flux recovery unit flux separating barrel flux hopper flux recovery and convey tube.Welding system 2sets of MZ--1000welding machineWelding control board and welding gunSpare parts: 3 piece of 5A 1a fuse,2 push bottoms 2 pieces of 10A fuse 8 pieces of wire guide.Technique document (send out to clientele after bargain go into effect )a, Operating manual(including electrical diagram)b, Delivery listc, Certificated, Foundation diagrame, Inverter manual. flux recovery manual, SAW manual