Gute quanlity Uhr Kamera

watch camera Preface Thank you for using our product. This manual can guide you to use it and the application program correctly. Before you use this product and its’ application program, please pay enough attention to the manual to ensure you can use this product correctly and easily. Function Summarize 1)Video Resolution : 640*480(1280*960 Choose) 2)Video Format : AVI, 30fps. 3)Camera Photo:1280*960(3264*2448 Choose), JPG 4)USB transfer rate: 1.1(Hs) 5) Optional memory: 2GB/4GB/8GB 6) Supports video and voice recording function 7)Built-in lithium battery, keep on working for 2 hours 8)No need to install drivers for windows ME/2000/XP/MAX OS 9.2.2 or higer version windows (except Windows 98) Charge 1.) This camera watch is built-in chargeable lithium battery, to charge, you can connect the USB cable to watch, then connect to the USB port of PC, if it is done correctly, you will find the red light on the watch is on, when the battery indicated is full with charge, the blue light will be on, and you can stop charging this time 2.) During the action of photograph, the camera watch will turn off automatically when lacking of power, at the same time, the system will save the photograph file before it is power off, this can ensure the security of the file. Exterior and Key 1. Turn on/Off,Video Recording, File Saves 2, Hidden Camera 3, USB Port 4, Take Picture 5, LED Indicator Operation Turn on/off, Video Recording, File Saves Press the switch, the video watch will turn on as well. The red and green light will flash about 2 seconds then the light will stop on green as standby for your operation. Short press the switch, the red light will flash once into the operation of take picture, press once will take a photograph accordingly. When it’s on standby, press and hold on about 3 seconds with green light flash in three times, the video watch will start to video recording when the green light off. (Note: if the video watch doesn’t has enough memory space, the Video watch will turn off automatically.) File saves During the operation of video recording, short press the switch, the file will be save, when finish the file saving, the guide light will keep on green as standby condition. The video watch will be power off within 15 seconds if there is nothing operation. Turn off In the condition of standby, the video watch will be power off within 3 minutes if there is nothing operation. Connect to computer 1. Check your computer to ensure there is a port for USB connection. 2. Used USB-cable connected to the computer, the disk of the watch will be shown on your computer. 3. You can view record files on this disk, you can copy, remove, delete, paste it. Also you can store other file in it. 4. Remove USB Drive. a. Double click on the icon “Safety delete the hardware” (the green arrow under right of screen) b. Click “stop” in the dialog of “Safety delete the hardware”. c. Choose the dive you need to stop, select “confirm”, the drive will safety delete. (The arrow space will jump out message: ”USB Mass Storage Device, this drive can safety pull out of the system”) d. Close dialog “Safety delete hardware”. e. Pull out the drive & Disconnect of the computer. Technology Specifications Connect to Computer USB 2.0 Flash 512M-8G Charge Voltage limit 4.2V Battery norm 3.7V/260mAh Charge hours 2 3 Hours Videotape Electric Current 110 -120mAh Format AVI 640*480, 30fps. Problem SolutionCan not power on Please check whether your charge the battery or not, if no power, please recharge it accordingly. Can not download file or upload the file. 1. Check if the PC and drive connect well (correctly). 2. Check if the software driver are installed well( In Windows 98 system) 3. Check if the video watch have enough space to store the video file.