Gr4 Titanstab

Gr4 titanium rod1.Grade:Gr1,Gr2,Gr3,Gr4,Gr5,Ti6Al4V ELI,Gr7,Gr9,Gr11,Gr12, Gr23,Ti6Al7Nb,Ti153332.Processing:Hot forging, Hot rectifying, Hot rolling, Grinding3.Standard:ASTM B348,ASTMF67,ASTM F136,ISO5832/2,ISO5832/3,ISO5832/11,AMS4928,MIL4911Titanium barGradeManufacturing technologydelivery statediameter(mm)the implementation of standardsTA1 TA2 TA9 TA10hot forging + lathe (polishing )R M6-200GB/T 2965-98 GB/T 13810-1997 ASTM B348-2000TC1 TC2 TC3 TC4 TC12hot forging + lathe (polishing )R M6-200reference standard 1. GB 228 metal tensile test method 2 GB / T 3620.1 grades of titanium and titanium alloy and chemical composition 2. GB / T 3620.2 chemical composition of titanium and titanium alloy products and also allowed component derivation 3. GB 4698chemical analysis method to titanium sponge, titanium and titanium1. The chemical composition of titanium and titanium alloy rods shall be meet requirements with GB / T 3620.1, the chemical composition of the allowed deviation should be in accordance with GB / T 3620.2 requirements, by reinspecting of demand-side. 2. Diameter or side lengths and the allowed deviation of hot rods should be in accordance with the requirements of Table 1. 3. The Diameter of the rods after thermal processing and been processed with lathing, (grinding) and cold-rolling, its deviation should be allowed to table II. 4. The non-roundness of the rods after thermal processing (grinding) should be less than the half of its dimension tolerance. 5. For processing the Ti rods of non fixed length ,the length 300 6000mm, Length at annealing state 300 2000mm, the length of Constant Length or double length should under the rang of the non- fixed dimension. The allowed deviation of fixed length is + 20 mm; the double length should also be included in the volume of incision rods, per amount of incision is 5mm. the fixed length or double length should be specified in the contract.Table IDiameter or side length8 15>15 20>20 35>35 50>50 80>80 125>125 150>150 200Hot forging bars±1.0±1.5±2.0±2.5±3.0±3.5±5.0±6.5Hot squeeze bar+0.8,-0.7+0.8,-1.0±2.0±2.5±2.5-------------Hot-rolled bar+0.6,-0.5+0.7,-0.5+1.2,-0.5+1.5,-1.0+2.0,-1.0+2.2,-1.2-----------The specificationwould be changed by the customers' requirements