Glasmatte

Chopped Strand Mat. Fiberglass Chopped Strand Mat is an unwoven fabric consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling towers etc. General Data Product Code: EMC & CMC. Glass type: E-glass or C-glass. Bond type: Powder binder or Emulsion binder Desity: 80-900g/m2. Usually is 225gsm/300gsm/450gsm/600gsm Roll Width: 200-2600mm usually is 750mm/1040mm/1250mm/1270mm Roll weight: 28kgs-50kgs Package: Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Deposited: Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%.