Geogrid Herstellung Maschine

Geogrid Manufacture machine 1.Material-box one set Feeding plastic machine. one set 2.Extruder: model:SJ150/25 one set Bolt diameter: φ150mm, Ratio of length and diameter: 25:1 Heating machine is cast-aluminum. Screw and barrel adopt 38CrMoALA, after nitrogen, Hardness HV940-1100 Screw: mold BM Motor power:100kw converter gear. 3. Die head one set Width of mold :1350mm Heating: heating by electric heating rod of rust-proof steel 4.Haul-off device and water-box one set Length:1500mm Motor:3NM Water way: Recycled water 5.Compressor one set Nominal pressure:800KN Punch frequency: 120 times/min Feeding way: feeding by itself Lubrication way: Automatic lubrication Motor:10KW Adjusting speed's electric motor 6. Diethe maximum width of passing materials is 1300mm one set 7. Longitudinal tensile machine one set Width of roll: 1400mm Motor: 1.5KW,4KW,18KW Modulation speed Heating way: Steam Stretching mode: Water stretching 8. Horizontal tensile machine one set Width tensile: 4000mm Heating300,000KCa Hot- blast Stove two sets Heating medium: air Fans: two sets Fan motor: 22KW two sets 9. Rewind one set Rewind: center for rewinding Cutting way: Manual cutting Measurement method: automatic Note: we can increase flat roll of product according to customer needs. Cutting way can be automatic