Fuel Pump Test Machine EPT-619D

Functions 1 Measurement of each cylinder's delivery at various rotation speeds;2 Checking of each cylinder's injection time with static state;3 Checking of the mechanical speed governors;4 Checking of the electric magnetic valve of distributor pumps;5 Checking performance of the pneumatic speed governors;6 Checking of the pressure compensators (LDA);7 Measurement of the reflux delivery of distributor pumps; (May selection)8 Measurement of the internal pressure of the distributor pumps body.9 Checking of the pneumatic speed governors’ vacuum performance; (May selection)10 Measurement of rack travel; (Mayselection)11 Checking of the sealing of fuel injection pump body. Characteristics 1 Changing frequency ; changing rotation speed; 2 Small fall of rotation speed and large output torque; 3 High measurement precision;4 The functions of over voltage, overload and short circuit protection; 5 Ten kinds of rotation speeds presetting;6 Constant temperature controlled;7 Ultra low noise;8 Operating position: arbitrary side of the two work sides of the test stand;9 Rotation speed, count and temperature are displayed in digits mode, and air pressure is displayed on the mechanical gauge.10 Built-in air resource. Technical Parameters 1 Adjustable rotation speed range: 0 4000r/m;2 Double Series graduates: 45cc, 150cc;3 Volume of oil tank: 60L;4 Temperature stabilization: 40±20C:5 Test oil filtering unit: 5μ;6 D.C. Supply: 12v/24v;7 Feed pressure: low: 0 0.4Mpa.high:0 4Mpa;8 Air pressure: 0 0.3Mpa;9 3-phase power supply: 380V/50Hz or on request;10 Flywheel inertia’s moment: 0.8 Kg.M2;11 Center height: 125 mm;11 Output power: 5.5KW,7.5KW,11KW and 15KW or on request;12 Overall dimensions(mm): 2370×960×1880;13 Net weights (KG):1200.