Förderband, verschleißfeste keramische Bandreiniger

The wear resistant ceramic belt cleanerdetail descriptions: Dahua, belt cleaner technology systems help bulk materials handling facilities accomplish their goals for safety,cleanliness,environmental compliance and operating efficency. Totally different from the conventional structures,the ceramic belts of Dahua is the newest type of belt scraper already developed up to today's.For remove tailings on the surface of the encrusted belts carrying material. The belt cleaning is installed from the axis of the conveyor belt,until botton of the belt apart,demonstrating the efficacy of cleaning. - Suitable for cleaning a dry, block, wet, powder, sticky, or high temperature object - Very easy to install and can be installed in a short time - High cleaning power. Tips are installed with an angle to clean up a conveyor belt sharply - Light weight. The Huapeng belt cleaner (W = 900) is approximately 9 Kg in weight - Long service life. Approx. 10 months for sinter, approx. 15 months for limestone, approx. 15 months for coal, approx. 10 months for iron ore - Ceramic tips closely contact with a conveyor belt for cleaning even if the belt is worn in the center or a crowned pulley is used to drive the belt. TheDahua belt cleaner is durable and can normally maintain its cleaning power in 24 hours operation for one year or longer (the abrasion rate of the tip varies depending on a conveyed object). The Features of the conventional tip belt cleaner: In the conventional tip belt cleaner, a gap was produced between the tip and the belt so that the belt cleaner could not work properly. It also took time to install and adjust the belt cleaner on site High performance and quality of the layers of tiles,shown that there is no need for more of a scrapers for conveyor belt. Today are installed primary and secondary scrapers for an efficient cleaning of quality,however ,trade and sudden stops that upset production. The belt cleanerDahua reduce costs and maintenance,have long life,high performance,easily to install and most importantly no need to install more than one. The efficacy of the cleaning is superior by the persitence of the power of abrasion from the chips. The structure of ceramic and metal is resistante in the face of low and high temperature,otherwise it is installation is extremely easy. The new belt cleaner is positioned in the front part of the head pulley. The scraperDahua were developed to act as efficient system for cleaning of waste materials and aggreates. Waste sent to the pipeline or chute means more cleaning along the belt and reducing overall costs.The belt scraper of the diagonal has the function to be installed in smaller belts of 60mm t0 1.20mm in 3lentgh. The belt cleaner in V ofDahua is installed on conveyor belts for larger size of 1.20mm to 1.60mm in length,were developed to clean with maximum efficiency to the waste materials. Newly improved spring tensioned and fixed side holders are shown in photos at the upper left and right sides, respectively. With the new holders, the belt cleaner becomes easier to install than conventional belt cleaners and its wire becomes adjustable individually. In addition, the ceramic tips can contact with a conveyor belt more closely to improve the cleaning efficiency. Our crews have the tools,the training,and experience to shorten the learning curve and meet your requirements. Dahua engineered components will improve performance and reduce spillage and airbone dust.And engineered flow transfer chutes help material handling operations achive ne w stanards of excellence. If you are interested in our items,please contact us without least delay.