Flotation Maschine

Detailed Descriptions of Flotation Machine: Flotationmachine is applicable for the separation of nonferrous metal and ferrous metal and nonmetal, such as fluorite and talc. The impellers are driven through V-belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board. Application of Flotation Machine: To check the bolts before starting the machine and to use hand instead of impellers to prevent the sediment from adding the burden of electromotor. To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months. Easy wear parts: impellers and stators Technical parameters of XJK series flotation machine ModelXJK-0.35(3A)XJK-0.62(4A)XJK-1.1(5A)XJK-2.8(6A)XJK-5.8(7A)Effective cubage(m3)0.350.621.12.85.8Production capacity(m3/min)0.18-0.40.3-0.90.6-1.61.5-3.53-7Rotation speed(r/min)470400330280240Blade diameter(mm)300350500600750MotorModelRotorY90L-4Y100L2-4Y132M2-6Y160L-6Y200L2-6(Y225M-6)Scraping plateY90S-4Y90S-4Y90S-4Y90S-4Y90L-4Power(kw)Blade Motor1.535.51122(30)Scraping plate Motor1.11.11.11.11.5Weight(t/single trough)0.430.861.382.333.533Note:This specification is just for reference, any changes are subject to the products