Flotation Ausrüstung

Floatation equipment General Introduction of Floatation equipmentThis type of Floatation machine is formed by U through solid, hollow shaft inflation, suspension rotor and new type impeller. The cone impeller lean backwards, the blending quantity is big and the pressure head is small, the advantages are: simple structure and low energy consumption. Inside the impeller, there is air distributor, which distributes air into most parts of impeller evenly. Floatation equipment is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.Working Principle and Main Features of Floatation equipmentFloatation equipment has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.YTserials of floatationequipmentModelSF-0.37SF-0.7SF-1.2SF-2.8SF-4Volume (m³)0.370.71.22.84Impeller diametersm300350450550650Capacityt/h0.2-0.40.3-0.90.6-1.21.5-3.50.5-4Impeller speed(r/min)352400312268238MotorTypeRotor(1) Y90L-4(1)Y132S-6(1)Y13M-6(1)Y180L-6(1)Y200L-8Scrapper(2) Y80L-4(2)Y90L-6(2)Y90L-6(2)Y100L-4(2) Y100L-6Power(1)1.5(2)0.75(1)3(2)1.1(1)5.5(2)1.1(1)11(2)1.5(1)15(2)1.5Diamension(mm)700*700*750900*1100*9601100*1100*11001700*1600*11501700*1600*1150Weight per chute(t)445600124022422660