Figur-8 Single- / Multimode-Faser-Außenkabel

Description: The fiber .250um are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes(and fillers) are stranded around the strength member into a compat and circular cable core. After an PSP moisture barrier is applied around the cable core . this part of cable accompanied with the stranded wire as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure. Figure 8 cable GYTC8Y,GYTC8A are also available on request. This type of cable is specifically applied for self-suppouting aerial installation. Characteristics: High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost. Good mechanical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber The following measures are taken to ensure the cable watertight Steel wire used as the central strength member Loose tube filling compound 100% cable core filling PSP enhancing moisture-proof Standards: GYTC8S cable complies with Standard YD/T 901-2001 as well as IEC 60794-1.