Fiberglass Sleeving beschichtet mit Polyurethan

2741 Fiberglass sleeving coated withe Polyurethane (In accordance with Q/CGJD05-2008,IEC60684-3-409) Fiberglasssleeving coated with polyurethane is manufactured with non-alkali fiberglass braided sleeving and coated it with acryl ate latex and polyurethane and then heated it to form F grade insulating sleeving. It possesses reliable heat resistance, good qualities of dielectric, excellent softness and elasticity. It can be used for wiring insulation and mechanic protection for F grade electrical machinery electric appliances. Length: 1000(+20,-10) mm (continuous length may be negotiated) Requirements of Property: Bending after heating: No visible cracking or detachment of coating,and the colour shall be cleary recognizable.(use a test temperature of 180±3K.) Bending at low temperature: No sivible cracking or detachment of coating. ( use a test temperature of -15±3K.) Hydrolysis of coating: No running of the coating.No adherence between sleeving and paper or between the pieces of sleeving.No sign of discoloration of the paper Flam propagation:60seconds max, The indicator flag on any of the three test specimens shall not be burned,burned awayor charred,nor shall flaming or glowing particles or flaming drops ignite the cotton. Temperature index: 155oC Bore diameter(mm)Wall thickness(mm)NominalToleranceNominalTolerance0.5±0.150.50±0.151, 1.5, 2, 2.5±0.200.50± 0.153, 4, 5, 6±0.258, 9, 10,12±0.300.70± 0.2014,16,18,20±0.500.70±0.3025±0.601.0±0.5030±0.601.5±0.50 Requirement for breakdown voltage( kv min)RemarksAt room tempertureAt elevated temperatureAt damp heatTest medthod: straight mandrel with 100mm electrode Lowest valueCentral valueLowest valueCentral valueLowestvalueCentral value563.542.53.5The test at elevated temperature shall be carried out at 155± 3K