Fiberglass Glasmatte

Fiberglass Chopped Strand Mat Fiberglass Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling towers etc., General Data: Product Code: EMC & CMC Glass type: E-glass or C-glass Bond type: Powder or Emulsion Density: 80g/m2-900g/m2.Normal types are 180g/m2.225g/m2.300g/m2450g/m2.600m2 Bond Content: 100g/m2 (10%-15%). 300g/m2.450g/m2.600g/m2 (4%-6%) Roll Width: 200mm-2600mm.Normal types are 750mm.1040mm.1250mm.1270mm.1450mm Roll weight: 28kgs-55kgs. Normal types are 28kgs.30kgs.35kgs Package: Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Quantity: 20'GP Container: About 9500kgs 40'GP Container: About 20000kgs 40'HC Container: About 22500kgs Deposited: Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%