Feuchtigkeitsabsorptionsmittel Additiv-Masterbatch

Summary: 1. Name: Moisture absorbent additive masterbatch 2. Grade NO.: 600 3. Instruction: In the process of plastic products, brcause of moiste raw material, there are some foam will affect quality of plastic products. 600 can reslove this problem, it can suck the water and eliminate the foam. Physical properties: IndexValueUnitTest standardMFI(190,2.16kg)≥2.0g/10 minGB3682-2000AppearanceCylindricalDiameter: 23Length:24whitemmMoisture Content≤1.0%Moisture absorbent weight20%-25% of masterbatchs weightApplication: Can be used in LDPEHDPELLDPEPP and recycle material.Suitable for blow film, plastic piece, plastic pipe, blow molding, coating film and injecting.Addition rate: In the film, our suggestional additive rate is 1%-3%.In the plastic sheet, pipe, blow molding and injection products, our suggestional additive rate is 2%-5%.The ideal additive rate will be confirmed after testing.Useage: 1. Before use the masterbatch, pls check its package is well or not. when the masterbatch exposed to moisture, use it will affect products quality.2. Dont need to adjust producing technology and equipment, just need to confirm additive rate , compound 600 and customerraw material. Compound cant be store too long time, in the normal time ( in the winter, dont over 4 hours, in the summer, dont over 2 hours).3. 600 cant be dry together with other kinds of moistrue raw material.4. Ideal additive rate will be confirmed after testing.Packing: Water-proof bag, 25kg/bagStorage: The product is sensitive to moisture, but it can be stored well in original package. Once open its packing, please use it immediately. keep product in dry and seal package and store it in the ventilated and dry warehouse. The guarantee period is 6 months.