Faserzementwellplatten Manufacturin

No.1 Slurry Prepare Plant: to prepare all materials such as cement, asbestos fiber, glass fiber, paper pulp. Then mix them with water to prepare slurry and storage of slurry. No.2 Slurry Pickup & Layer taking Machine: to pickup and carry slurry , pre-dewatering, and make the slurry adhere to felt-belt-carrier to form layers. Then carry the partly dehydrated slurry to final dehydrating & felt-belt cleaning station. No.3 Vacuum Dehydrating & Felt Cleaning Machine; The slurry is completely dewatered by vacuum pump. The felt-belt is cleaned and rough sheet is formed. No.4 Flat sheet Maker; the rough sheet is rolled into-flat sheet, then carried to flat sheet receiver to form multilayer flat sheet according to required thickness of final product . No.5 Flat Sheet Receiver: to receive the ready-made multilayer flat sheet and carry it via a transition roller-way to pre-forming press. No.6 Transition Roller Way: to connect Flat Sheet Receiver station to Pre-Forming Press No.7 Pre-Forming Press: roughly press the flat sheet into corrugated sheet then carry it via a transition roller way into Rolling Forming Press. No.8 Transition Roller way: to connect Pre-Forming Press and Rolling-Forming Press. No.9 Rolling-Forming Press: finally and precisely press the sheet to form a perfect corrugated sheet. Then it is carried via a transition roller way to trimmer station. No.10 Transition Roller Way: to connect Rolling-Forming Press and Trimmer. No.11 Trimmer: at this station , the corrugated sheet is trimmed after the four edges cut , Then the sheet with final dimension and shape is carried via a transition roller way to stacking conveyor. No.12 Transition Roller way: to connect Trimmer and Conveyor stacker. No.13 Conveyor stacker: to lift the green corrugated sheet off the mould-board of producing line and stack it on another mould-board to go to curing house. Physical and Mechanical Properties of Fiber Cement Corrugated Roofing Sheet Test ItemGradeExcellentGradeAGradePassed Bending Strength Transversal (N/M)≥380034003000Longitudinal (N) ≥320310300Water Absorption Rate≤%262828Anti-Freezing PropertyNot laminated / destroyed after 25 freeze-thaw cyclesAnti-Impact PropertyCrack, peeling, through hole are invisible at impacted area after one time of impact observed from 60cm distance.ImpermeabilityWet spots at back side are allowed but water droplet unallowed after soaked