Farbnebel Reinigungsmaschine

Paint mist purifying machineWorking principle:When the paint exhaust gas pass through the XT-type paint mist purifying machine, the multi-layer filtering material will make interception, collision, absorption, etc. to the paint mist particles, holding paint mist particles within the filtering material to achieve the purpose of paint mist.In order to ensure the high efficiency of paint mist purification and exhaust gases to comply with national emission standards, the secondary filtering method is adopted for equipment used in this way, the second-grade filtering on the basis of the first-grade filtering will make the material be more uniform, higher density, and the pore diameter is smaller, and the purifying rate of paint mist after the secondary filter can reach more than 95%.Process flow:Paint mist exhausted gas ¡ú primary treatment ¡ú secondary treatment ¡ú clean airDirection for use:1. The equipment is appropriate for the purification of paint mist, if it is necessary to purify the organic exhaust gas, the purifying devices for organic exhaust gas.2. After normal operation for 3 to 4 days, the filtering material must be cleaned; using industrial suction cleaner can be used continually after sucking the paint mist out.3. The filtering material should be replaced after it is used for 2 to 3 month.