Exotherme Schweißen Flux

Exothermic Welding Flux Specification: Exothermic Welding Flux is generated with several chemical substance after aluminum heating reaction under high temperature and welding is done by melting mold and heating sealing is done completely between same metals such as copper, between different metals such as copper and steel to realize the real molecular association, so that the grounding units are permanently secured free from maintenance. This cementing agent is the item which the company had obtained three patents. This item is verified by National Power Head Quarter, Wuhan High Pressure Research Office after several times of inspection as up to the inspection standard and is the high-tech item that passed national inspection and the initial product produced in domestic. Below advantages: 1, Current carrying capability from welding point is same as conductor with good conducting performance. After inspection, the DC resistance ratio and change rate are almost zero before and after welding. This is the level that any of the traditional welding method cannot be compared 2, No need of resources from outside. It can be operated indoor and outdoor3, It won't be damaged by surge current. The test shows the conductor will be melted earlier than welding points when under high current impact in short period4, Corrosion or slack will not be produced from welding. As it is weld junction,no contact surface, no residual stress, junction is stable and reliable as long term conductive body 5, As it is welding junction, connector and conductor are combined on molecular.So it has a good mechanical strength and is a permanent junction6, Equipment is simple, convenient and handy. The operation is easy and can be done without professionals