ES-Serie Metallgehäuse

ES Matel enclosure Construction features: 1.The flange, that is beside all the tank gate and tank body, the largest width is 21mm. 2.Blind hinge does not poke the inner of the door case and the inner of the tank body. Install and replace the tank gate conveniently .the tank gate could open 130°. 3.The bed plate uses three-stage design which could exchange and move .makes the machining and cable inlet more convenient. 4.The subpanel uses for the plastic slider pushing in the tank from the front through guide rail. 5.The width of the subpanel is 2.5mm, both sides have the C type flange of which the width is 23mm, make the subpanel more firm and convenience transports. 6.Plate of tank bottom three ,you can replace each other. mobile convenience, is easy to import cables, easy processing. 7.The firm rectangular main frame can fix on the tank gate with the screw. The frame has a screw hole every 25mm to fix the cable trench, bunch of cables and binder plate etc. 8.Both the tank body and gate have the ground wire to connect with the screw. meanwhile can also be unload.External dimensionsmm: Simple Gate Double Gate width height depth width height depth 600 1600 400 1000 1800 400 600 1600 500 1200 1600 500 600 1800 400 1200 1800 400 600 1800 500 1200 2000 500 600 2000 500 1600 1800 400 800 1600 500 1800 2000 500 800 1800 400800 1800 500