Erhöhte Einlegesohlen kleben 32 - B05

Properties and USES: The insole adhesive series products moderate viscosity, can be rapidly sulfide, transparency high temperature, high elasticres ilience, permanent deformation, heat, water resistant, good permeability, suitable for suspension sole, insole etc products production. The main technique parameters: model32-B05 Appearance (A/B component)translucent A and B component proportion1:1A/B component viscosity (million CPS) 2Hard (JIS A) 8 10Resistance to tear strength (KN m. - 1) p8 10Tensile strength (MPa) p 2Elongation (%) p 550Can operation time (25 °C / h) 5 6Curing conditions 200°C/5minDensity (g · cm - 3) 1.08 Method of use: Will A and B component proportion by weight, mixing with the injection molding process or after vacuum exhaust bubble after heat moulding. Perfusion, Storage and precautions: 1, plus molding series products as the dangerous goods, sealed storage, put in a cool place, prevent the rain, the sun exposure. 2, add molding series product use should be banned and condensation type of organic tin compounds mixed silicone rubber, otherwise, sizing material not sulfide, avoid with nitrogen compounds containing sulphur phosphorous mixed, otherwise would also make this product vulcanization incomplete or not sulfide.