EPS-Sandwich-Verkleidung Linie

EPS Sandwich Panel Line, EPS Sandwich Panel making machine, EPS Sandwich Panel equipment, Iaminator for corrugated sandwich panel mainly consists of a roll forming machine and a sandwich Panel laminating system. Through this line, corrugated sandwich panels can be produced directly, without the shortcoming that traditional corrugated sandwich panels have to be laminated manually after the forming of corrugated sheet. Moreover, both the roll forming machine and the laminating system can work independently. The roll forming machine of the line consists of feeding system, roll forming systm and cutting system, while the laminating system is made up of such equipment as decoiler, feeding, squeezing, heating, laminating, edge rolling, edge turn-over, groove-making, edge pruning, pneumatic device, automatic cutting and PLC. The whole machine possesses advanced working crafts. The sandwich panels of this line are widely used as the roof and wall of factory, warehouse, garage, exhibition center, cinema, theatre, gymnasium, civil construction, stadium, cold storage, etc. 1. Size: 42000mm X 3600mm X 3300mm (Length X Width X Height) 2. Controlling system: PLC 3. Total power (including heating): about 40kw 4. Working speed: 1000 3000mm / min 5. Suitable working temperature: about 25 6. Density of EPS: >18kg / m 7. Suitable material for production: 1000 1200mm (0. 5 0. 6mm) 1. Size:42000mm X 3600mm X 3300mm (Length X Width X Height) 2. Controlling system:PLC 4. Working speed:1000 3000mm / min 5. Suitable working temperature:about 25 6. Density of EPS:>18kg / m