Epoxy-Kleber

Epoxy Adhesive: This product is a two-component liquid epoxy adhesive.Bisphenol-A and Epichlorohydrin are mixed in different ratios and cured,It can be used on paint,civil architecture,insulating material,adhesive,and stabilizing agent, JCN epoxy adhesive can be used on metal, glass, ceramic, wood and electronic components, It cures at a low temperature. It is durable with high bonding strength,oil resistant, chemical resistant, and electrical resistant. I. Phyiscal QualitiesCatehory/QualitiesA(Principle agent)B(curing agent)ColorClearClear/TransparentAppearanceLiquidLiquidViscosity cps/25 C10000-1500012000-55000Weight ratio1.171-0.97PHR100100Main ingredientsBisphenol-APolyamideOperating time3min-2hrMembrane5min-6hrHardening time1hr-24hrTemperarure resistance-10C-90C*PHR:The amornt of curing agent needed with epoxy resin 100 epoxy 180-200.*Depends on the amount used and temperature, in general 25C. and 100 grams. II. Usage1.The ratio or principle agent and curing agent is 1:1. Stir after mixing and apply to the bonding piece.simply press together to bond.2.Surface treatment:Remove all oil and stain on the piece to be bonded by cleaning or grinding. Rubber and plastic surfaces must be treated prior to bonding. III. Reference DataThe transformation temperature of the hardened piece is 80C. Adhesiveness lost at 100C,Adhesiveness would notbe lost due to becoming bristle in winter or at -40 c.Tensile shear strengthCondition/Pull/MaterialAluminum-AluminunWhite iron-White ironABS-ABSWood-Wood160 c*30min120kg/cm2100kg/cm260-70kg/cm2Material breaking24hr90kg/cm280kg/cm250kg/cm280kg/cm27day120kg/cm295kg/cm260-70kg/cm2Material breaking*For actual operation please refer to JCN-100.