EP-5500 Doppelseitiges Klebeband mit Thin PET Film

EP5500-Double sided tape with thin PET film,ROHS&ISO9001,140011.Product Description Double Coated Tape with a thin polyester film for dimensional stability and improved handling with ease of die cutting and laminating. The high tack adhesive provides relatively high initialadhesion and good shear holding power to a variety of surfaces. 2.Construction EP 5500Face side 1 Adhesive Type/Thickness Acrylate/0.0007(0.018mm) Backside 2 Adhesive Type/Thickness Acrylate/0.0007(0.018mm) Liner Color,Type White,55#SCK,No print Liner Caliper 0.003(0.076mm) Carrier Type Clear PET 3/0.0005(0.012mm) Note 1:Faceside adhesive is on the interior of the roll,exposed when unwound. 2:Backside adhesive is on the exterior of the roll,exposed when liner is removed. 3:PET(Polyester) 3. Typical Physical Note : The following technical information and data should be considered representative or typical only and should not be used forProperties and specification purposes.PerformanceCharacteristicsEP5500Adhesion to stainless steel15 minutes RT70(N/100mm)72 hours RT76(N/100mm)Adhesion to PET15 minutes RT65(N/100mm)Adhesion to other surfaces15 minutes RTABS60(N/100mm)Polycarbonate65(N/100mm)SheartStrength-ASTM D3654 (1 inch2 sample size)1000grams at 72(22) 10000 minutesRelative solvent resistanceMedium-LowUV ResistanceMediumRelative High Temperature Operating RangesLong Term(days,week) 80Short Term(minutes,hours)150Shelf Life of Tape in Roll Form 24 months from date of manufacture when stored in original cartons at 70(21) and 50% relative humidity4. Application Bond strength is dependent upon the amount of adhesive-to-surfaceTechniques contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.Note: Carefully read and follow the manufacturers precautions and directions for use when working with solvents.5.General All tapes have a film carrier, which can add dimensional stability toInformation foams and other substrates. The carrier also provides easier handling during slitting and die-cutting. 6.Features Adhesive is a medium-firm acrylic adhesive system featuring both high initial adhesion and good high temperature holding power. 7.Application Medical/non-medical diagnostic test stripsIdeas Plastic film lamination/bondingSplicingFoam lamination 8.Application To apply adhesives in a wide web format, lamination equipment isEquipment required to ensure acceptable quality. To learn more about working with pressure-sensitive adhesives please refer to technical bulletin, Lamination Techniques for Converters of Laminating Adhesives.9.Certification/ MSDS: has prepared a MSDS for the products.Recognition TSCA: The product are defined as articles under the Toxic Substances Control Act and therefore,are exempt from inventory listing requirements.ISO9001ISO14001